result element

In general, excess calcium effects result from the anion with which the element is associated.

通常, 钙素过量是与该元素相联系的阴离子伴随产生的.

To resolve all comments for an element, select that element and resolve the comments that are highlighted as a result.

为了释放一个元素上的所有注释，选择该元素，并释放强调显示的注释。

Most helium result from the combination of one a particle released by decaying radioactive element with two electrons. polonium is the decay daughter of radioactive element radon.

氦主要是放射性元素衰变释放出的a粒子与两个电子结合而成的，钋是放射性元素氡的衰变子体。

On the basis of the impacting test of particle separator vortex blade, utilize ANSYS/ LS-DYNA finite element software to carry on the value computation to the impacting process and the analysis to the computed result;

在粒子分离器涡流叶片外物撞击试验的基础上，运用ANSYS/LS-DYNA有限元软件对撞击过程进行了数值计算，对计算结果进行了分析；

The adoption of Crout decomposition method gives satisfactory result in studying, by finite element method, the telluric electromagnetic sounding curve taken from 2-D structure.

在用有限元法研究二维构造上大地电磁测深曲线时，采用Crout分解法取得了满意的结果。

From the results of the analysis, it is known that the error rate between finite element analysis and practical measurement results is 3.6%, So the finite element analysis result is reliable.

从其分析的结果可知，有限元分析与实际测量的结果误差率为3.6%，从而可知有限元分析的结果是可靠的。

Rain gutter and stacked two-element of half TEM-horn arrays and four-element of half TEM-horn arrays were investigated by simulation and experiments. Experiments of TEM-horn array verified the result of the FDTD simulations.

用半TEM喇叭天线组成槽状排列和叠状排列的二元线阵和四元线阵，进行了相应的原理性实验，实验结果与理论数值模拟基本一致。

Based on the numerical simulation result of convective heat transfer, the finite element calculating model of the integrate jacket structure of the cylinder of a thin film evaporator was established, the stress analysis and the intensity calculation of the structure were made using the finite element method.

根据对流传热数值模拟结果，建立了薄膜蒸发器筒节整体夹套结构的有限元计算模型，利用有限单元法进行了结构的应力分析和强度计算。

Based on research achievements in some documentaries, with reference to calculating result of thick shell curve elements, an evaluation to 3-D solid element numeric analog simulation performance of 3 different displacement modes is carried out so to provide reference to space stress analysis for curve girders.

以一些文献的研究成果为依据，并以厚壳曲面单元的计算结果作参考，对3种不同位移模式的三维实体单元数值模拟性能进行评价，为曲线梁的空间受力分析提供参考。

The result showed that Curie temperature, the element size and the thickness of metallic leaf springs have a significant effect on the characteristics in current attenuation of the above mentioned thermistors.

居里温度、元件尺寸的大小及消磁正、副片间金属簧片的厚度对电脑彩色显示器PTC消磁热敏电阻器的电流衰减特性有重要影响。

Comparing test mode result with simulation mode analysis data, the finite element model is verified.

通过试验模态结果与模态仿真分析数据的对比，验证了有限元模型。